ISPE

FEBRUARY 13, 2023

Bob also initiated an agreement under which ISPE’s Guidance Documents are made available to PIC/S and WHO inspectors, which is still in place today. Most recently he assisted the regulatory authorities of Saudi Arabia, Russia, China, Jordan, and Philippines in the process to attain PIC/S membership.

Documentation 98

Documentation FDA 98

ISPE

MAY 9, 2023

Improvements have been observed by various regulatory agencies in Latin America for the acceptance and implementation of international standards—for instance, the ICH Common Technical Document (CTD) format. Additional required information beyond ICH guidelines, or non-value-added documents (e.g., 6, and 2.3.S.7 7 are required.

Documentation 52

Documentation Packaging Pharmaceutical Companies Pharmaceutical Companies 52

ISPE

MARCH 29, 2023

Concept Paper: M4Q(R2) Common Technical Document on Quality Guideline.” As part of the US Food and Drug Administration (FDA) QbD pilot 4 in 2005–2006, the need to convey how the control strategy is linked to the target product profile (TPP) and quality target product profile (QTPP) was discussed. The authors propose using Module 2.3

Documentation 52

Documentation Dosage Packaging Communication 52

ISPE

MARCH 29, 2023

Concept Paper: M4Q(R2) Common Technical Document on Quality Guideline.” As part of the US Food and Drug Administration (FDA) QbD pilot 4 in 2005–2006, the need to convey how the control strategy is linked to the target product profile (TPP) and quality target product profile (QTPP) was discussed. The authors propose using Module 2.3

Documentation 52

Documentation Dosage Packaging Communication 52

ISPE

JANUARY 9, 2023

It was time for ISPE to update this key guidance document to reflect technological progress. Concepts of computerized software assurance (CSA) as discussed in the US FDA Center for Devices and Radiological Health (CDRH) Case for Quality program 1 are also explored and applied. 1 US Food and Drug Administration. 15 September 2020.

Documentation 52

Documentation FDA Communication 52

ISPE

SEPTEMBER 11, 2023

The setpoint for “proper” air velocity in cleanroom systems is documented in standards and regulations as 0.45 9 In 2015, the FDA published a guidance manual 10 that provided questions for inspections, including: Is the air flow in critical areas unidirectional when delivered to the point of use? m/s up to 0.54 At what velocity?

Documentation 52

Documentation FDA Packaging Communication 52

ISPE

MAY 10, 2023

Although the pharmaceutical industry has consistently improved manufacturing processes 3 in compliance with good manufacturing practices, 4 there are documented deviations from good practices 5 including the continued falsification of medicines. 6 (Note: The terms “pharmaceutical” and “pharma” interchangeably employ throughout this article.)

Chemotherapy 52

Chemotherapy Documentation Dosage Labelling 52